Insane Logo Rear Window Banner

INSANE Logo Rear Window Banner

Rep INSANE on the road with this premium 30×14" die-cut rear window banner. Designed for outdoor durability and bold visibility, this decal is built to withstand the elements while making a statement.

Specs:

• Size: 30" wide × 14" tall
• Material: Premium outdoor gloss vinyl
• Design: White outline with transparent interior (see-through)
• Finish: Die-cut design (no background)
• Weather-resistant and long-lasting

Application Instructions:

This is a transfer decal - here's how to apply it to your rear window:

1. Clean the surface Wash your rear window with soap and water, then dry completely. Wipe down with rubbing alcohol to remove any residue or oils. Let dry.

2. Position the decal Use masking tape to hold the decal in place on the OUTSIDE of your window. Step back and make sure it's centered and level before applying.

3. Peel the backing Once positioned, tape one edge to the window as a hinge. Slowly peel away the paper backing from the decal, exposing the adhesive side.

4. Apply from hinge side Starting from the taped hinge edge, slowly lower the decal onto the glass while smoothing outward with a credit card or your hand. Work your way across the entire decal, pushing out air bubbles as you go.

5. Remove transfer tape Slowly peel away the clear transfer tape at a sharp angle (180 degrees back on itself). If the decal starts to lift, press it back down and continue peeling slowly.

6. Final smoothing Go over the entire decal one more time with your hand or card to ensure full adhesion. Let it set for 48 hours before washing your car.

Tips:

• Apply in temperatures above 50°F for best results
• Avoid applying in direct sunlight or extreme heat
• If bubbles appear, gently lift the decal and reapply, or use a pin to pop small bubbles and smooth flat